کارت کنترل اینورتر EGS031

PartNumberEGS031
(1 بررسی مشتری)

22,743,243 

کارت کنترل اینورتر EGS031 مناسب برای اینورتر سه فاز

*تصاویر صرفا برای معرفی بهتر محصولات هستند، لطفا مشخصات فنی محصولات را مطالعه نمایید.*

موجود

توضیحات

کارت کنترل اینورتر EGS031

 

کارت کنترل اینورتر EGS031 در اینورترهای سه فاز، UPSهای سه فاز و EPSهای سه فاز مورد استفاده قرار می‌گیرد. تراشه کنترلی نصب شده بر روی این برد EG8030 بوده و توسط آن می‌توان ولتاژی سینوسی خالص را مهیا کرد.

 

کاربردها

  1. اینورتر سینوسی
  2. دستگاه جوش
  3. اینورتر موج مربعی
  4. اینورتر خورشیدی
  5. UPS

 

ویژگی‌های محصول

با توجه به اهمیت مطالب فنی از ترجمه صرف نظر شده است.

 

  • 5V single power supply
  • The external 16MHz crystal oscillator
  • Pin Configuration four operating modes
    • Three-phase synchronous open loop regulator
    • Closed-loop three-phase synchronous regulators
    • Independent open-loop three-phase voltage regulator
    • Closed-loop three-phase independent regulator
  • The voltage, current, temperature feedback real-time processing
  • overvoltage, undervoltage, overcurrent, short circuit, overheat protection
  • Pin 3S Soft Start
  • The phase sequence reversal function
  • The phase correction function
  • The way LED status indicator and buzzer alarm
  • an embankment along a sinusoidal frequency output and analog output
  • The way the fan control output
  • The pin is set two kinds of three-phase pure sine wave output frequency:
    • 50Hz fixed frequency pure sine wave
    • 60Hz fixed frequency pure sine wave
  • PWM carrier frequency can be set
    • 20KHz carrier frequency
    • 10KHz carrier frequency
    • 5 KHz carrier frequency
    • Carrier frequency 2.5KHz
  • Dead band control pins can be set four kinds of dead time:
    • 300nS deadtime
    • 500nS deadtime
    • 1.0uS deadtime
    • 2.0uS deadtime
0/5 (0 نظر)
نظرات (1)

1 دیدگاه برای کارت کنترل اینورتر EGS031

  1. pakdelmelisa21

    دارای تراشه کنترلر EG8030

دیدگاه خود را بنویسید

نشانی ایمیل شما منتشر نخواهد شد. بخش‌های موردنیاز علامت‌گذاری شده‌اند *