آی سی رابط USB به سریال FT4232HL
آی سی رابط USB به سریال FT4232HL پنجمین سری از محصولات USB شرکت FTDI است. FT4232H یک رابط USB2.0 High Speed به UART/MPSSE است. این قطعه 4 درگاه UART داشته که دو پورت به عنوان UART/Bit-Bang و دو پورت دیگر به عنوان JTAG, SPI, I2C, Bit-bang قابل استفاده است.
کاربردها
- بارکد خوان
- دوربین
- MP3 پلیر
ویژگی‌های محصول
با توجه به اهمیت مطالب فنی از ترجمه صرف نظر شده است.
- Single chip USB to quad serial ports with a variety of configurations.
- Entire USB protocol handled on the chip. No USB specific firmware programming required.
- USB 2.0 High Speed (480Mbits/Second) and Full Speed (12Mbits/Second) compatible.
- Two Multi-Protocol Synchronous Serial Engine (MPSSE) on channel A and channel B, to simplify synchronous serial protocol (USB to JTAG, I2C, SPI or bit bang) design.
- Independent Baud rate generators.
- RS232/RS422/RS485 UART Transfer Data Rate up to 12Mbaud. (RS232 Data Rate limited by external level shifter).
- FTDI’s royalty-free Virtual Com Port (VCP) and Direct (D2XX) drivers eliminate the requirement for USB driver development in most cases.
- Optional traffic TX/RX indicators can be added with LEDs and an external 74HC595 shift register.
- Adjustable receive buffer timeout.
- Support for USB suspend and resume conditions via PWREN#, SUSPEND# and RI# pins.
- Highly integrated design includes +1.8V LDO regulator for VCORE, integrated POR function and on chip clock multiplier PLL (12MHz – 480MHz).
- FTDI FT232B style, asynchronous serial UART interface option with full hardware handshaking and modem interface signals.
- Fully assisted hardware or X-On / X-Off software handshaking.
- UART Interface supports 7/8 bit data, 1/2 stop bits, and Odd/Even/Mark/Space/No Parity.
- Auto-transmit enable control for RS485 serial applications using TXDEN pin.
- Operational configuration mode and USB Description strings configurable in external EEPROM over the USB interface.
- Low operating and USB suspend current.
- Configurable I/O drive strength (4, 8, 12 or 16mA) and slew rate.
- Supports bus powered, self-powered and high-power bus powered USB configurations.
- UHCI/OHCI/EHCI host controller compatible.
- USB Bulk data transfer mode (512 byte packets in High Speed mode).
- Dedicated Windows DLLs available for USB to JTAG, USB to SPI, and USB to I2C applications.
- +1.8V (chip core) and +3.3V I/O interfacing (+5V Tolerant).
- Extended -40°C to 85°C industrial operating temperature range.
- Compact 64-LD Lead Free LQFP or QFN package
- Available in compact Pb-free 56 Pin VQFN packages (RoHS compliant)
- +3.3V single supply operating voltage range.
- ESD protection for FT4232H IO’s:
- Human Body Model (HBM) ±2kV,
- Machine Mode (MM) ±200V,
- Charge Device Model (CDM) ±500V,
- Latch-up free.
|
|
barsa –
آی سی رابط USB به سریال FT4232HL
این قطعه 4 درگاه UART داشته که دو تا از آنها به عنوان پورت UART/Bit-Bang و دو پورت دیگر به عنوان JTAG, SPI, I2C, Bit-bang قابل استفاده است.