رله تک کانال 5 ولت همراه با ریموت کنترل مادون قرمز MJK-96

رله تک کانال 5 ولت همراه با ریموت کنترل مادون قرمز MJK-96

رله تک کانال 5 ولت همراه با ریموت کنترل مادون قرمز MJK-96 دارای ولتاژ رله 5 ولت و ماکزیمم محدوده کنترل 8 متر بوده که برای استفاده در میکروکامپیوترهای single chip مناسب می‌باشد. از ویژگیهای این رله میتوان به کنترل سیگنال‌های AC/DC، وجود نشانگر حالت LED  اشاره کرد. با فشردن دکمه‌ی ON مکش High Level بسته شده و با فشردن دکمه‌ی Low Level ،OFF فعال می‌شود. این قطعه دارای رله جریان‌های بزرگ 250VAC-10A, 125VAC-10A, 30VDC-10A, 28VDC-1 بوده و سایز آن  17*19*15 میلی‌متر یا 0.66*0.74*2 اینچ است.

کاربردها:

1.  کنترل لوازم الکتریکی خانگی

2. کنترل‌های صنعتی

Feature:
1. It is suitable for single chip microcomputer, household electrical appliance control and so on.

2. Control the DC / AC signal.
3. A normally closed contact and a often open contact.
4. High level suction closes (press “ON” button), low level release (press “OFF” button).

Specification:
Relay voltage: 5V, with LED state indicator
Control range: the longest 8 meters
Equipped with large current relay: 250VAC-10A, 125VAC-10A, 30VDC-10A, 28VDC-1
Size: 51*19*17mm/2*0.74*0.66”

Module instructions:
1. Power on the power supply, the correct LED indicator is on, the module works normally after 5 seconds, and the relay works at the same time!
2. Each time the S1 button is pressed, the relay switches to the working state, on or off, and the indicator light is on or off!
3. After the infrared remote control is successfully learned, each time the remote control that successfully learns is pressed once (the remote control learning method is below), the relay switches the working state once, on or off, and the indicator light is on or off!

There are two types of remote learning methods:
1. Press and hold the S1 button for more than 5 seconds, when the indicator LED1 turns on, it means to enter the learning state, then release the button S1, and then press the remote control button, the indicator light just flashes, indicating that the learning has been successful!
2. Align the infrared receiving head of the module with the remote control, press and hold any button of the remote control for 10 seconds. When the indicator LED1 turns on, it means to enter the learning state. Press the remote control button again, the indicator light just flashes, indicating that the learning has been successful. !
(Cancel the learning state, you can press the S1 button when the LED1 is on, or wait for 30 seconds to automatically exit the study!)
The theoretical distance is about 8-12 meters, but the actual application depends on the surrounding environment factors and intermediate barriers (such as diaphragm, glass or other material barrier), the receiving head uses HX1838T (very good quality T version, non-general experiment The receiving head) can receive any remote control coded data of 38K frequency!

Note: The remote control of most home appliances can be learned and recognized, but the air conditioner remote control, non-38KHz remote control can not be learned!