·         2 kB/4 kB/8 kB of on-chip static RAM and 8 kB/16 kB/32 kB of on-chip flash program memory. 128-bit wide interface/accelerator enables high-speed 70 MHz operation.

·         ISP/IAP via on-chip bootloader software. Single flash sector or full chip erase in 100 ms and programming of 256 bytes in 1 ms.

·         EmbeddedICE-RT offers real-time debugging with the on-chip RealMonitor software.

·         The 10-bit ADC provides eight analog inputs, with conversion times as low as 2.44 µs per channel and dedicated result registers to minimize interrupt overhead.

·         Two 32-bit timers/external event counters with combined seven capture and seven compare channels.

·         Two 16-bit timers/external event counters with combined three capture and seven compare channels.

·         Low power Real-Time Clock (RTC) with independent power and dedicated 32 kHz clock input.

·         Vectored interrupt controller with configurable priorities and vector addresses.

·         Up to thirty-two 5 V tolerant fast general purpose I/O pins.

·         Up to 13 edge or level sensitive external interrupt pins available.

·         70 MHz maximum CPU clock available from programmable on-chip PLL with a possible input frequency of 10 MHz to 25 MHz and a settling time of 100 µs.

·         On-chip integrated oscillator operates with an external crystal in the range from 1 MHz to 25 MHz.

·         Power saving modes include Idle mode, Power-down mode with RTC active, and Power-down mode.

·         Individual enable/disable of peripheral functions as well as peripheral clock scaling for additional power optimization.

·         Processor wake-up from Power-down mode via external interrupt or RTC.